Yeah I have the latest Bios, If I change the settings manually to 9-10-9-27 everything works fine without changing the voltage etc. It's not going to hurt anything if you do, it's just better to use the lowest possible voltage when your overclocking. BIOS's are not the most accurate when it comes to reading voltages.īut start out at the 1.55v and only go to 1.6 if you need to. That and sometimes MB's will tend to undervolt the memory despite what the BIOS says. It will put the image in Pictures>Screenshots. To do a screen capture in Windows 10 press the windows key and the print screen button together. This is common with speeds above the native 1600mhz your CPU is rated for. Run speed fan then click on the Exotics tab > show the magic. What can i do to fix this annoying problem when gaming. After remove cpuz manually and with a free trial o cc cleaner now my desktop is randomly crashing due to error Event 7000 (The cpuz 136 service failed to start due to the following error: This driver has been blocked from loading. With the XMP profile enabled, manually set your DIMM voltage to 1.55 and even possibly 1.6 if you have to. Windows 10 crashing randomly after remove cpuz. It's possible the SPD chip wasn't programed correctly, but that wont affect performance or the way the memory functions. If they are not, go ahead and manually change it. Usually it's BIOS update that cures the mis-decting issue(as far as the timing go) But check to see if they are set to 9-10-9-27 with XMP enabled. This ca often be solved with just a couple of BIOS tweaks.įirst and foremost,Do you have the latest BIOS for your MB? If not please go ahead and flash to latest stable version.įrom there make sure to load set up defaults and enable XMP. Hi Raven, i don't believe this is defective.

Cpu z asus crashing computers